240SX Motoring 1pc Aluminum Driveshaft Nissan 240SX S14 95-98 description
240SX Motoring 1pc Aluminum Driveshaft Nissan 240SX S14 95-98
Single shaft conversion for the 240sx platform, this is a complete 6060-T6 aluminum shaft that is about 1/2 the weight of the factory 2 piece. The shaft has larger, replaceable and greaseable u-joints and can handle about 650WHP. So if your looking for that extra snap to DRIFTING or just want a stronger smoother shaft for your car here it is.
Light weight (11lbs) 6061 aluminum driveshaft.
Replace the heavy factory 2pc driveshaft.
Works for both KA and SR20DET motors.
* To install on KA motors, one needs to bang out the metal shield collars around the tranny ends to make room for the driveshaft joint.
Please Note: All aftermarket driveshafts might be slightly larger than factory specs therefore minor clearance might need to be cut or cleared in the driveshaft tunnel. Driveshaft should have a minimum of 1/2" clearance for proper use.
|
