ACT Xtreme 4 Pad Solid Race Clutch Kit Acura Integra 94-01 description
ACT Xtreme 4 Pad Solid Race Clutch Kit Acura Integra 94-01
After spending long hours and thousands of dollars building that high powered engine, you need a quality clutch that can properly transfer that power into motion. Count on ACT clutches for quality, performance and affordability.
ACT recognizes that every driver and engine set-up is unique, so a variety of complete clutch kits and components are offered to match virtually any situation. ACT’s complete clutch kits include a pressure plate, disc, release bearing, and (in most cases) a pilot bearing and alignment tool. The kit guide on the next page will help you select the ACT kit that best fits your needs. The following pages include ACT clutch kits and components listed by application. Torque capacities are provided for every clutch combination. When a specific flywheel is required for an ACT Clutch, it will be designated in the chart for your convenience.
Consider carefully which clutch is right for your car. First you need a clutch that will hold all the power, but not too excessive. For street use, you also need a long lasting clutch that has a positive feel, smooth engagement and quiet operation. For racing, you need a tough clutch that will enable quick shifts and hard slips all the way to the finish line.
Xtreme Pressure Plate:
Clamps load increase of 50% to 120%, Pedal feels moderate to stiff, Many SFI Certified to insure safety.
Solid Hub (4 Pad) Disc
Recommended for Drag and Road Racing, Increased torque capacity, Fastest shifts, low inertia, Good durability but shortened spline life, Harsh engagement, chatter.Specs:
Torque Capacity: 408 ft/lbs
Clamp Load Increase: 100%
Pressure Plate: H-025X
Disc: 4220010
Release Bearing: RB817
Pilot Bearing: PB1002
Align Tool: AT88
Note: Fits All, B Series, 220mm.
*Please Call for Best Pricing - 1-480-966-3040*
|
