Exedy Ceramic Plate Clutch Subaru WRX 2002+ description
EXEDY cerametallic clutches are designed to handle the abuse of high power modified engines. Our cerametallic friction material can handle much more slippage than stock type disc assemblies without slipping and fading.
All EXEDY cerametallic clutch discs have spring center dampers to reduce the impact and shock loads put into the drive train. This protects the transmission and the rest of the drive line system.
The thick cerametallic discs have better heat capacity and therefore better durability in demanding applications such as all wheel drive. Even with the normal thickness, our three puck cerametallic discs still typically have less inertia than a stock disc.
With any cerametallic clutch system, there will be some compromise of start up driveability as compared to a stock clutch (chatter on light throttle, low rpm start up). This characteristic is generally felt to be acceptable in modified performance cars. Drivers of cerametallic clutches on the street should be warned not to ride the clutch or to try to reduce the chatter as this will greatly increase the wear.
Torque Capacity Increase 87%
Clamp Load (lb): 2310
Spline Teeth / Major Dia (mm): 230
Disc O. D. (mm): 24T / 25.2
Lightweight Flywheel Part Number: FF01
Weight (lb): 14.3
Standard Clutch Kit Part Number: KSB01
Applications:
2002-04 Subaru Impreza WRX 2.0L EJ20T Turbo, Pull Type, (GC8, GF8, GDA)
1995-01 Subaru Impreza, Legacy 2.2L 6 Turbo, Pull Type
Picture is for representation only. Actual product may vary.
*Please Call for Best Pricing - 1-480-966-3040*
|
