Forced Performance FPGREEN Turbo Subaru WRX STI 02-07 description
Forced Performance FPGREEN Turbo Subaru WRX STI 02-07
The FPGreen's 8cm ported exhaust housing retains the stock Subaru flange patterns. An internal wastegate is standard on the FPGreen with an adjustable 15psi high pressure actuator and is capable of filling the Subaru motor with over 30 psi of boost if called upon. Install is simple and straightforward, allowing use of existing exhaust and intercooler components. This turbo features a 2.4" compressor housing inlet as standard spec or an optional 3" cover can be selected for those intending to run 3" air inlet tubes such as the Perrin tube.
Like all Forced Performance Mitsubishi race turbos, the FPGreen is fitted with FP's proprietary severe duty bearing system which increases surface area to deal with the loads of high boost pressure found in racing applications. No other vendor can offer this thrust bearing system. Forced Performance also carries stainless steel high flow oil feed lines to complete your installation.
For those of you that run 3" air inlet tubes for your turbochargers, we can now offer the FPGreen model with the 3" inlet compressor housing. This has shown to significantly reduce lag and deliver more whp by reducing the PR the compressor section must operate at to achieve a given boost pressure. The corresponding reduction in turbine back pressure is the key to this improvement.
Options include:
Wastegate Config: Internal or External
Compressor Housing: 2.4" Compressor Inlet or 3" Compressor Inlet
Turbine Housing: 8cm or 7cm
Turbine Housing Coating: Standard Uncoated or Ceramic Coated.
Please select below.
Vivid Racing is an authorized Forced Performance Dealer. Please call for additional Turbo information.
|
